Tech 21 Landmark 120
Tech 21 NYC Logo

LANDMARK 120

This user-friendly, highly adaptable powerhouse is the EZ Pass to awesome bass tone in any situation. Styled after the acclaimed SansAmp Bass Driver DI pedal, the Landmark 120 boasts a simple control layout with active EQ, Presence to control definition and upper harmonic content, and Drive to push the amp into fat, formidable overdrive. A Blend control mixes your direct signal with the SansAmp signal for dense, detailed tone. The 120-watt output is easily handled by a custom-designed Eminence® 15” speaker, which uses a costly Neodymium magnet for high efficiency, ultra low weight and unbelievably fast attack. The buff Landmark 120 has the muscle for a stage rig and the finesse for studio tracking, courtesy of the proprietary SansAmp technology.

Distortion and Overdrive?
Pro-league bass distortion is not something you would expect from an affordable, compact bass combo, but we like to be the exception to the rule here at Tech 21. Our SansAmp technology delivers Richter measured rumble without outboard effects, overblown rigs, or even high volume.

Model Number:

LM120

Input Impedance:1MOhm 
Nominal Input Level:-10dBu
Optimal Output Load:16 Ohms 
Power Output:120W
Effect Loop Input Impedance1MOhm
Maximum Effect Loop Input*approx. -6dBu
Nominal Effect Loop Output Impedance1KOhm
Nominal Effect Loop Output*approx. -20dBu
Nominal XLR Output*approx. -20dBu
Maximum Power Consumption:240W
AC Input Power:100V, 117V, 230V, 240V
NOTE: AC power cannot be switched. See authorized dealer/distributor for voltage modification information. 
Cycles:

50/60 Hz 

SpeakerCustom Eminence Neodymium Model #2115-BN 15″, 300W, 16Ohms
Dimensions:19.75”w x 21.75”h x 15.25”d
Weight:

48 lbs

Note: With on-going product development and improvements, specifications and/or the cosmetic appearance of this unit may change without prior notice. Replacement parts are available, i.e., knobs, logo plate, handles, etc. For more information, please contact your authorized dealer or Tech 21.
* Measured using a -10dB 400Hz test signal with all amp controls flat, no Reverb or Boost. Actual levels will vary with your settings.

ADDITIONAL FEATURES

The SansAmp XLR Output reproduces the sound of a carefully miked cabinet from a simple DI hook-up. Patch it into a PA for an instant happening tone, or enjoy noise-free, dynamic bass sound in the studio.


Custom-designed 15-inch Eminence Neodymium speaker, 16Ω/300 watts handling.


Effect Loop.


Headphone Output.


1/4” Speaker Output.


Scuff-proof cabinet with chrome-plated steel grill.

Close Menu