SOLD
OUT |
This
unit has been discontinued. |
|
| Landmark
Series Bass Amplification Sound Samples |
| Please
note that all Landmark bass amps will achieve the same results |
|
DI
+ Mike
(Left side is SansAmp XLR out;
Right side is miked) |
|
|
|
|
|
| ®
Registered trademarks of their respective companies. Names of
sound samples are intended for descriptive purposes only
and should not be construed as an endorsement or affiliation
with the companies or artists named. |
|
Built on the successful tones of the 100% analog SansAmp Bass Driver
DI pedal, the Landmark 60 is a multi-tasking combo for stage
and studio work. Featuring a 60-watt output, a 12” speaker
and a scuff-proof cabinet, this little workhorse has a kick like
a mule. A 12dB cut or boost from Active Bass and Treble controls
coupled with a Presence control can find any sound in the spectrum.
And the Drive control does exactly what it says -- all the way
to gargantuan crushing distortion. The Blend control allows you
to mix your direct instrument signal with the SansAmp circuitry
for a rich, complex sound. Whatever your style, it will benefit
from the Landmark 60’s even bass response without harsh
peaks or valleys. God of Thunder behavior, however, is the sole
responsibility of the user.
Distortion
and Overdrive?
Pro-league bass distortion is not something you would expect from
an affordable, compact bass combo, but we like to be the exception
to the rule here at Tech 21. Our SansAmp technology delivers Richter
measured rumble without outboard effects, overblown rigs, or even
high volume.
|
LM-60
ADDITIONAL FEATURES
SansAmp
XLR Output. On live gigs, you can plug directly into the P.A.,
and the audience will think you’ve got a mega-watt bass
stack stashed backstage.
For
recording, you can go direct into the board and get the same sound
you hear coming out of the speaker right onto tape or disc.
In
the studio, you can also employ different microphones and miking
techniques
for even more versatility.
Custom-designed
12-inch speaker, 8Ω/100 watts handling
Effect
Loop.
Headphone
Output.
1/4”
Speaker Output.
Scuff-proof
cabinet with chrome-plated steel grill.
Click to enlarge
| SPECIFICATIONS |
| Model
Number: |
LM60 |
| Input
Impedance: |
1MOhm |
| Nominal
Input Level: |
-10dBu |
| Optimal
Output Load: |
8
Ohms |
| Power
Output: |
60W |
| Effect
Loop Input Impedance |
1MOhm |
| Maximum
Effect Loop Input* |
approx.
-6dBu |
| Nominal
Effect Loop Output Impedance |
1KOhm |
| Nominal
Effect Loop Output* |
approx.
-20dBu |
| Nominal
XLR Output* |
approx.
-20dBu |
| Maximum
Power Consumption: |
120W |
| AC
Input Power: |
100V,
117V, 230V, 240V |
| NOTE:
AC power cannot be switched. See authorized dealer/distributor
for voltage modification information. |
| Cycles: |
50/60
Hz |
| Speaker |
Tech
21 Special Design Model #2112-B 12", 100W, 8Ohms |
| Dimensions: |
18.25”w
x 18.75”h x 14.25”d |
| Weight: |
36
lbs |
| Note:
With on-going product development and improvements, specifications
and/or the cosmetic appearance of this unit may change
without prior notice. Replacement parts are available,
i.e., knobs, logo plate, handles, etc. For more information,
please contact your authorized dealer or Tech 21. |
*
Measured using a -10dB 400Hz test signal with all amp controls
flat, no Reverb or Boost. Actual levels will vary with
your settings.
|
|
|
|
