Tech 21 Power Engine 60
Tech 21 NYC Logo

POWER ENGINE 60

The Power Engine 60 is an all-purpose, multi-function, powered extension cabinet. Available in 3 configurations, each packs 60 watts of transparent power. They can be used with any direct recording device or pre-amp, analog or digital, tube or solid state, in stompbox or rackmount formats –including our very own line of SansAmps. When plugging your favorite device into a Power Engine, the tone is unaffected. So there’s no need to labor over readjusting all your parameters that would otherwise be colored by a conventional amp.

These handsome cabinets perfectly complement our line of Trademark combo amps. The Power Engine 60 will accept XLR and 1/4” inputs and includes a balanced XLR output to ‘daisy-chain’ with other Power Engine 60s. Knowing that not all rooms are created acoustically perfect, you can compensate for less than ideal environments by adjusting the on-board, active three-band EQ.

Wherever your tones come from, make the Power Engine 60 your destination for portable, pure reproduction.

Model Number

PW60

Input Impedance:10kOhms
Nominal Input Level-20dBm to +4dBm
Optimal Output Load:8 Ohms
Power Output:60W
Maximum Power Consumption:120W
AC Input Power (factory set):100V, 117V, 230V, 240V
Cycles:50/60 Hz
Speaker:

(1×12) Celestion® Seventy80 Model #CT2112-8 12″, 80W, 8Ω

(2×12) Celestion® Seventy80 Model #CT2112-16 12″, 80W,
16Ω each 8Ω Total Load

(4×10) Eminence® Model #ET-2110-8, 10″, 50W, 8Ω each,
8Ω Total Load

Cabinet Dimensions:  

(1×12) 20″l x 11″w x 18″h

(2×12) 26″l x 12″w x 19″h

(4×10) 22″l x 12″w x 22″h

Weight:   1×12: 33 lbs; 2×12: 39 lbs; 4×10: 43 lbs
Note: With on-going product development and improvements, specifications and/or the cosmetic appearance of this unit may change without prior notice. Replacement parts are available, i.e., knobs, logo plate, handles, etc. For more information, please contact your authorized dealer or Tech 21.
Close Menu