Single channel, 1×8, 10 watts.
We call this our Direct Recording Combo Amp. We should have called it Yoda, because there isn’t much this diminutive wizard can’t handle. The heart of the crafty Trademark 10 is a modified version of the super flexible SansAmp GT2 pedal design. Construct your tone by selecting amp character, gain structure and speaker type, and then use the drive controls and active three-band EQ to nail your sound. The 10-watt output is plenty loud for practice and monitoring but the balanced XLR and 1/4” outputs bring the big tones of this little combo to the studio mixer or PA system. Bedroom, rehearsal, studio or club, the Trademark 10 will prove it’s a giant amongst compact combos.
Nominal Input Level*
Optimum Output Load
Effect Loop Input Impedance
Maximum Effect Loop Input*
Effect Loop Output Impedance
Nominal Effect Loop Output*
Nominal XLR Output*
Maximum Power Consumption
AC Input Power (Factory Set)
|110V, 117V, 230V, 240V|
|Speaker||Special Design Model #C2108-A 8″, 15W, 8 Ohms|
|14.5″l x 8″w x 13.25″h|
*Measured using a -10dB 400Hz test signal with all amp controls flat, no Reverb or Boost.
Actual levels will vary with your settings.
Character section to construct a custom tone in seconds.
Professional quality Accutronics® 3-spring reverb.
3-band, active tone controls, boost or cut 12dB.
Headphone output doubles as a 1/4” direct out.
Speaker extension output.
XLR Direct Output.