|
 |
SOLD
OUT |
and
discontinued. |
Recommended
alternatives:
• Landmark 60 + Bass Power Engine 60 |
| Landmark
Series Bass Amplification Sound Samples |
| Please
note that all Landmark bass amps will achieve the same results |
|
DI
+ Mike
(Left side is SansAmp XLR
out; Right side is miked) |
|
|
|
|
|
| ®
Registered trademarks of their respective companies. Names of
sound samples are intended for descriptive purposes only and
should not be construed as an endorsement or affiliation with
the companies or artists named. |
|
This
user-friendly, highly adaptable powerhouse is the EZ
Pass to awesome bass tone in any situation. Styled after
the acclaimed SansAmp Bass Driver DI pedal, the Landmark
120 boasts a simple control layout with active EQ, Presence
to control definition and upper harmonic content, and
Drive to push the amp into fat, formidable overdrive.
A Blend control mixes your direct signal with the SansAmp
signal for dense, detailed tone. The 120-watt output
is easily handled by a custom-designed Eminence® 15” speaker,
which uses a costly Neodymium magnet for high efficiency,
ultra low weight and unbelievably fast attack. The buff
Landmark 120 has the muscle for a stage rig and the finesse
for studio tracking, courtesy of the proprietary SansAmp
technology.
Distortion
and Overdrive?
Pro-league bass distortion is not something you would expect
from an affordable, compact bass combo, but we like to
be the exception to the rule here at Tech 21. Our SansAmp
technology delivers Richter measured rumble without outboard
effects, overblown rigs, or even high volume. |
|
Click to enlarge
|
LM-120
ADDITIONAL FEATURES
The
SansAmp XLR Output reproduces the sound of a carefully miked
cabinet from a simple DI hook-up. Patch it into a PA for an
instant happening tone, or enjoy noise-free, dynamic bass
sound in the studio.
Custom-designed
15-inch Eminence Neodymium speaker, 16Ω/300 watts handling.
Effect
Loop.
Headphone
Output.
1/4”
Speaker Output.
Scuff-proof
cabinet with chrome-plated steel grill.
| SPECIFICATIONS |
| Model
Number: |
LM120 |
| Input
Impedance: |
1MOhm |
| Nominal
Input Level: |
-10dBu |
| Optimal
Output Load: |
16 Ohms |
| Power
Output: |
120W |
| Effect
Loop Input Impedance |
1MOhm |
| Maximum
Effect Loop Input* |
approx.
-6dBu |
| Nominal
Effect Loop Output Impedance |
1KOhm |
| Nominal
Effect Loop Output* |
approx.
-20dBu |
| Nominal
XLR Output* |
approx.
-20dBu |
| Maximum
Power Consumption: |
240W |
| AC
Input Power: |
100V,
117V, 230V, 240V |
| NOTE:
AC power cannot be switched. See authorized dealer/distributor
for voltage modification information. |
| Cycles: |
50/60 Hz |
| Speaker |
Custom
Eminence Neodymium Model #2115-BN 15", 300W, 16Ohms |
| Dimensions: |
19.75”w x 21.75”h x 15.25”d |
| Weight: |
48 lbs |
| Note:
With on-going product development and improvements, specifications
and/or the cosmetic appearance of this unit may change
without prior notice. Replacement parts are available,
i.e., knobs, logo plate, handles, etc. For more information,
please contact your authorized dealer or Tech 21. |
*
Measured using a -10dB 400Hz test signal with all amp
controls flat, no Reverb or Boost. Actual levels will
vary with your settings.
|
|
|
|
 |
