SansAmp
XLR Output works like a built-in direct box to deliver the
true tone of the amp to the PA desk or studio board without
compromising detail, warmth or responsiveness. The XLR is
switchable from -20dB to 0dB.
Gain is a 10dB gain boost to set up the pre-amp for different
pickups. For example, with lower output, passive pickups,
you can have punchier sounds with Gain engaged. Conversely,
with higher output, active pickups, you can have a cleaner
sound with Gain disengaged.
Effects
Loop.
Tuner
Output - Independent buffered output provides a constant unaffected
signal.
1/4”
speaker outputs.
Rackmount
Kit
| SPECIFICATIONS |
| Model
Number: |
LM300 |
| Input
Impedance: |
1MOhm |
| Nominal
Input Level: |
-20dBu |
| Optimal
Output Load: |
4 Ohms |
| Power
Output: |
300W |
| Effect
Loop Input Impedance |
1MOhm |
| Maximum
Effect Loop Input* |
approx.
-6dBu |
| Nominal
Effect Loop Output Impedance |
1KOhm |
| Nominal
Effect Loop Output* |
approx.
-10dBu |
| Nominal
XLR Output* |
0
to -10dBu |
| Maximum
Power Consumption: |
600W |
| AC
Input Power: |
100V,
117V, 230V, 240V |
| NOTE:
AC power cannot be switched. See authorized dealer/distributor
for voltage modification information. |
| Cycles: |
50/60 Hz |
| Speaker |
NA. |
| Dimensions: |
17”w x 3.5”h x 10”d |
| Weight: |
23 lbs |
| Note:
With on-going product development and improvements,
specifications and/or the cosmetic appearance of this
unit may change without prior notice. Replacement parts
are available, i.e., knobs, logo plate, handles, etc.
For more information, please contact your authorized
dealer or Tech 21. |
*
Measured using a -10dB 400Hz test signal with all amp
controls flat, no Reverb or Boost. Actual levels will
vary with your settings.
|
|
4x10 Cabinets
• 8-Ohm / 400 watts handling
• Cast-frame, custom designed speakers
• Chrome-plated steel grill
• Rear vented
• Neutrik Speakon® and 1/4” connectors
• Measures 24”w x 24”h x 16”d
• Weight: 70lbs
1x15 Cabinets
• 8Ω / 300 watts handling
• Custom-designed 15-inch
Eminence Neodymium speaker
• Chrome-plated steel grill
• Rear vented
• Neutrik Speakon and 1/4” connectors
• Measures 24”w x 24”h x 16”d
• Weight: 70 lbs.
ARMD MIDI Converter
Controls footswitch functions of multi-channel Trademark and
Landmark amplifier footswitch functions with any MIDI controller
Black Vinyl Covers
Designed for the Landmark Series
coordinating speaker cabinets.
Speakon
Cables
in 4-foot and 5-foot lengths.
|
