|
 |
| Landmark
Series Bass Amplification Sound Samples |
| Please
note that all Landmark bass amps will achieve the same results |
|
DI
+ Mike
(Left side is SansAmp XLR
out; Right side is miked) |
|
|
|
|
|
| ®
Registered trademarks of their respective companies. Names of
sound samples are intended for descriptive purposes only and
should not be construed as an endorsement or affiliation with
the companies or artists named. |
|
|
Built on the successful tones of the 100% analog SansAmp Bass Driver
DI pedal, the Landmark 60 is a multi-tasking combo for stage and
studio work. Featuring a 60-watt output, a 12” speaker and
a scuff-proof cabinet, this little workhorse has a kick like a mule.
A 12dB cut or boost from Active Bass and Treble controls coupled
with a Presence control can find any sound in the spectrum. And
the Drive control does exactly what it says -- all the way to gargantuan
crushing distortion. The Blend control allows you to mix your direct
instrument signal with the SansAmp circuitry for a rich, complex
sound. Whatever your style, it will benefit from the Landmark 60’s
even bass response without harsh peaks or valleys. God of Thunder
behavior, however, is the sole responsibility of the user.
Distortion
and Overdrive?
Pro-league bass distortion is not something you would expect from
an affordable, compact bass combo, but we like to be the exception
to the rule here at Tech 21. Our SansAmp technology delivers Richter
measured rumble without outboard effects, overblown rigs, or even
high volume.
|
|
LM-60
ADDITIONAL FEATURES
SansAmp
XLR Output. On live gigs, you can plug directly into the P.A.,
and the audience will think you’ve got a mega-watt bass
stack stashed backstage.
For
recording, you can go direct into the board and get the same
sound you hear coming out of the speaker right onto tape or
disc.
In
the studio, you can also employ different microphones and miking
techniques
for even more versatility.
Custom-designed
12-inch speaker, 8Ω/100 watts handling
Effect
Loop.
Headphone
Output.
1/4”
Speaker Output.
Scuff-proof
cabinet with chrome-plated steel grill.
Click to enlarge
| SPECIFICATIONS |
| Model
Number: |
LM60 |
| Input
Impedance: |
1MOhm |
| Nominal
Input Level: |
-10dBu |
| Optimal
Output Load: |
8 Ohms |
| Power
Output: |
60W |
| Effect
Loop Input Impedance |
1MOhm |
| Maximum
Effect Loop Input* |
approx.
-6dBu |
| Nominal
Effect Loop Output Impedance |
1KOhm |
| Nominal
Effect Loop Output* |
approx.
-20dBu |
| Nominal
XLR Output* |
approx.
-20dBu |
| Maximum
Power Consumption: |
120W |
| AC
Input Power: |
100V,
117V, 230V, 240V |
| NOTE:
AC power cannot be switched. See authorized dealer/distributor
for voltage modification information. |
| Cycles: |
50/60 Hz |
| Speaker |
Tech
21 Special Design Model #2112-B 12", 100W, 8Ohms |
| Dimensions: |
18.25”w x 18.75”h x 14.25”d |
| Weight: |
36 lbs |
| Note:
With on-going product development and improvements, specifications
and/or the cosmetic appearance of this unit may change
without prior notice. Replacement parts are available,
i.e., knobs, logo plate, handles, etc. For more information,
please contact your authorized dealer or Tech 21. |
*
Measured using a -10dB 400Hz test signal with all amp
controls flat, no Reverb or Boost. Actual levels will
vary with your settings.
|
|
|
|
 |
