Single channel, 1x10, 30 watts.
We call this our Direct Recording Combo Amp. We should have called it Yoda, because there isn’t much this diminutive wizard can’t handle. The heart of the crafty Trademark 30 is a modified version of the super flexible SansAmp GT2 pedal design. Construct your tone by selecting amp character, gain structure and speaker type, and then use the drive controls and active three-band EQ to nail your sound. The 30-watt output is plenty loud for practice and monitoring but the balanced XLR and 1/4” outputs bring the big tones of this little combo to the studio mixer or PA system. Bedroom, rehearsal, studio or club, the Trademark 30 will prove it’s a giant amongst compact combos.

 

Click to enlarge

TM-30 ADDITIONAL FEATURES  

OPTIONAL ACCESSORIES
Character section to construct a custom tone in seconds.
Professional quality Accutronics® 3-spring reverb.
3-band, active tone controls, boost or cut 12dB.
Effect Loop.
Headphone output doubles as a 1/4” direct out.
Speaker extension output.
XLR Direct Output.
Weighs just over 14lbs.



Gig Bag for TM30
Multi-purpose Gig Bag has shoulder strap and roomy front compartment. Black nylon with silver embroidered logo.

Dimensions: 14.5"w x 13.5"h x 10.5"d.


SOUND SAMPLES


TM30 Sound Sample

First 30 seconds:
Rhythm: Tyler Classic (strat type)
Lead: Same guitar
Rhythm Guitar: "Fender Clean" setting from owner's manual
Lead Guitar: "SRV" setting from owner's manual

Middle section:
Rhythm: Tyler Studio elite
Lead: Same Guitar
Rhythm Guitar: "AC/DC" setting from owner's manual
Lead Guitar: "Van Halen" setting from owner's manual

Last section:
Rhythm: Les Paul Classic
Lead: Same guitar
Rhythm Guitar: "Metallica" setting from owner's manual
Lead Guitar: "Mesa/Boogie" setting from owner's manualAll delays were done at the board (post recording); no compression and/or EQ was used for the guitars.

All tracks written, performed and produced by Alex Garcia.

Note: Names of sample settings from the owner's manual are intended for descriptive purposes only and should not be construed as an endorsement or affiliation with the companies or artists named.

 
SPECIFICATIONS
Model Number
 TM30
Input Impedance
 1MOhm
Nominal Input Level*
 -10dBu
Optimum Output Load
 4 Ohms
Power Output
 30W
Effect Loop Input Impedance
 1MOhm
Maximum Effect Loop Input*
 approx. -6dBu
Effect Loop Output Impedance
 1KOhm
Nominal Effect Loop Output*
 approx. -20dBu
Nominal XLR Output*
 approx. -20dBu
Maximum Power Consumption
 60W
AC Input Power (Factory Set)
 110V, 117V, 230V, 240V
Cycles
 50/60Hz
Speaker Special Design Model #2110-T 10", 50W, 4 Ohms
Cabinet Dimensions
 14.5"l x 8"w x 13.25"h
Weight
 14lbs
*Measured using a -10dB 400Hz test signal with all amp controls flat, no Reverb or Boost.
Actual levels will vary with your settings.





©2007 TECH 21 USA, Inc.