|
 |
Two
Channels, 60 watts.
Channel 1 offers a range of Fender® styles, from chiming clean
to sizzling, saturated ‘tweed’ tone. The cunning Punch
control sets the amount of midrange break-up and overdrive, and
a Bite™ button tightens the low end and adds brightness. Things
get way raunchier over in Channel 2, with amp sounds ranging from
crunchy Marshall®, to gnarly Vox® AC30, to slamming Mesa®
Rectifier styles. A Weep™ button increases the amount of even
harmonics and thickens the sound. Its powerful and sophisticated
midrange control, appropriately named Growl™, can produce
brutal ‘scooped’ tones without any loss of girth or
volume. The powers of the Trademark 60 are many. Experience how
this soulful combo can work its magic like a tonal Tiki god. |
 |
1x12
- Loaded with Celestion®
Seventy80 Speaker,
80 Watts/8 Ohms |
2x12
- Loaded with
Celestion® Seventy80 Speakers
80 Watts/16 Ohms Each,
8 Ohms Total Load |
4x10
- Loaded with custom-designed
Eminence® Speakers
50 Watts/8 Ohms each,
8 Ohms Total Load |
Click to enlarge
| TM-60
ADDITIONAL FEATURES |
|
OPTIONAL
ACCESSORIES |
Master
section features active Low and High EQ controls, master Reverb
and Boost.
Midrange
is individually controlled by Punch in Channel 1 and by Growl
in Channel 2.
Top-of-the-line,
full-length Accutronics® 6-spring reverb.
Boost
function, for solos, increases the volume level up to 9dB
without altering your tone.
Unique
Link button connects the Boost and Reverb functions to increase
the size of your sound as well as the volume.
Headphone
output, which doubles as a 1/4” direct out.
Multi-function
footswitch (included) selects channels, activates the Reverb
and Boost functions and engages the Effect Loop.
Utilizes
any standard 1/4” instrument or speaker cable. |
ARMD MIDI Converter
Controls footswitch functions of multi-channel Trademark
and Landmark amplifier footswitch functions with any MIDI
controller
Black Vinyl Covers
|
| TM-60
SOUND SAMPLES |
|
Hear preset from manual |
Channel 1 preset |
Channel
2 |
|
1 |
"Clean Fender" Part |
"Dirty Marshall" Part |
|
2 |
"4x12 Clean" Rhythm Part |
"Van Halen 1" Tapping Part |
|
3 |
"Hendrix-Little Wing" Part |
"Hendrix-Purple Haze" Part |
|
4 |
"Stevie Ray" Part |
"Metallica/Mesa Boogie" Part |
|
5 |
"Santana-Clean Rhythm" Part |
"Santana-Lead" Part |
|
6 |
"B.B. King Blues" Lead Part |
"Clapton/Bluesbreaker" Part |
|
7 |
"George Benson Jazz" Intro Lead Rhythm Parts
|
"Larry Carlton Jazz" Lead Part
|
|
8 |
"Compressed Lead" Part |
"Lead" Part |
|
9 |
"Funk" Rhythm Part |
"Funk Lead" Part |
|
10 |
Vox AC-30-Queen (Crazy Little Thing Called Love) Part
|
Vox AC-30-Queen (Bohemian Rhapsody) Part
|
|
A/B Comparison
|
Not used |
Direct out/Miked |
|
SPECIFICATIONS |
| Model
Number |
TM60 |
| Input
Impedance |
1MOhm |
| Nominal
Input Level* |
-10dBu |
| Optimum
Output Load |
8
Ohms |
| Power
Output |
60W |
| Effect
Loop Input Impedance |
1MOhm |
| Maximum
Effect Loop Input* |
approx.
-6dBu |
| Effect
Loop Output Impedance |
1KOhm |
| Nominal
Effect Loop Output* |
approx.
-20dBu |
| Nominal
XLR Output* |
approx.
-20dBu |
| Maximum
Power Consumption |
120W |
| AC
Input Power (Factory Set) |
110V,
117V, 230V, 240V |
| Cycles |
50/60Hz |
| Speaker
(1x12) |
Celestion® Seventy80 Model #CT2112-8 12", 80W, 8Ω |
| Speaker
(2x12) |
Celestion®
Seventy80 Model #CT2112-16 12", 80W, 16Ω each 8Ω
Total Load |
| Speaker
(4x10) |
Eminence®
Model #ET-2110-8, 10", 50W, 8Ω each, 8Ω Total
Load |
| Cabinet
Dimensions (1x12) |
20"l
x 11"w x 18"h |
Cabinet
Dimensions (2x12) |
26"l
x 12"w x 19"h |
Cabinet
Dimensions (4x10) |
22"l
x 12"w x 22"h |
| Weight |
1x12:
36 lbs; 2x12: 42 lbs; 4x10: 46 lbs |
| *Measured
using a -10dB 400Hz test signal with all amp controls flat,
no Reverb or Boost.
Actual levels will vary with your settings. |
®
Registered trademarks of their respective companies. Names are
intended for descriptive purposes only.
|
|
 |
