Tech 21 Landmark 300
Tech 21 NYC Logo

LANDMARK 300

Two differently formatted channels deliver everything from warm classic tube tones to Sumo-sized distortion. This 2U, 300-watt rackmountable head features a fan-cooled chassis and is equally at home in a rack system or as a compact stand-alone head. Its heavy gauge steel case is touring tough. With pro features like a +10dB gain switch to enhance low output pickups and drive active pickups harder, and aSansAmp XLR Direct Output, this amp will quake the bedrock live and in the studio.

Model Number:

LM300

Input Impedance:1MOhm 
Nominal Input Level:-20dBu
Optimal Output Load:4 Ohms 
Power Output:300W
Effect Loop Input Impedance1MOhm
Maximum Effect Loop Input*approx. -6dBu
Nominal Effect Loop Output Impedance1KOhm
Nominal Effect Loop Output*approx. -10dBu
Nominal XLR Output*0 to -10dBu
Maximum Power Consumption:600W
AC Input Power:100V, 117V, 230V, 240V
NOTE: AC power cannot be switched. See authorized dealer/distributor for voltage modification information. 
Cycles:

50/60 Hz 

SpeakerNA.
Dimensions:17”w x 3.5”h x 10”d
Weight:

23 lbs

Note: With on-going product development and improvements, specifications and/or the cosmetic appearance of this unit may change without prior notice. Replacement parts are available, i.e., knobs, logo plate, handles, etc. For more information, please contact your authorized dealer or Tech 21.
* Measured using a -10dB 400Hz test signal with all amp controls flat, no Reverb or Boost. Actual levels will vary with your settings.

ADDITIONAL FEATURES

Tech 21 Landmark 300 Half Stack

SansAmp XLR Output works like a built-in direct box to deliver the true tone of the amp to the PA desk or studio board without compromising detail, warmth or responsiveness. The XLR is switchable from -20dB to 0dB.


Gain is a 10dB gain boost to set up the pre-amp for different pickups. For example, with lower output, passive pickups, you can have punchier sounds with Gain engaged. Conversely, with higher output, active pickups, you can have a cleaner sound with Gain disengaged.


Effects Loop.


Tuner Output – Independent buffered output provides a constant unaffected signal.


1/4” speaker outputs.


OPTIONAL ACCESSORY:
ARMD MIDI Converter to control the footswitch functions with any MIDI controller.
Available HERE.